WORKSHOP
- Aluminium files
-
)
Their special cut avoids clogging. Used for working on aluminium and its alloys, especially for finishing.
PRODUCT APPLICATIONS: HOBBY AND SCHOOL WORKSHOP
-
- Blanks for diamond tools
-
)
Used by diamond tools manufacturers.
Blanks manufactured under strict dimensional and flatness tolerance, thanks to the most advanced CNC systems and the best robotic technologies available.
Hardened and tempered, deburred and ready for electro-plating.
On request we manufacture tools with special shapes and dimensions.
Some of the blanks manufactured by CORRADI:
- NEEDLE FILES
- ESCAPEMENT FILES
- HANDY FILES
- PRECISION FILES
- RIFFLERS
- FILES FOR HAND MACHINES
- FILES FOR MACHINES
PRODUCT APPLICATIONS: WORKSHOP
-
- Contact point file
-
)
Thin file with built-in handle for filing in narrow grooves and slots, cleaning electric contact points, connections and spark plugs.
PRODUCT APPLICATIONS: HOBBY AND SCHOOL WORKSHOP
-
- CORINOX Needle files
-
)
They have the same characteristics of their respective needle files, precision files and rifflers but, thanks to CORINOX coating:
• have a surface hardness of 1200 HV (70-72 HRc), therefore a higher wear resistance and longer service life. That allows filing of hardened and tempered steel up to 60 HRc, hard-to-file materials like heat resistant steel, exotic alloys and reinforced plastics
• do not clog, allowing an easy work on plastics, rubber or wood
• have a surface corrosion-free layer, which allows filing of stainless steel leaving no corrosive residue on the workpiece
They are used for manufacturing of equipment for food, chemical, navy industries and nuclear powerplants.
They are used in jewellery making for filing platinum.
PRODUCT APPLICATIONS: WORKSHOP JEWELLERS AND GOLDSMITHS
-
- CORINOX Precision files
-
)
They have the same characteristics of their respective needle files, precision files and rifflers but, thanks to CORINOX coating:
• have a surface hardness of 1200 HV (70-72 HRc), therefore a higher wear resistance and longer service life. That allows filing of hardened and tempered steel up to 60 HRc, hard-to-file materials like heat resistant steel, exotic alloys and reinforced plastics
• do not clog, allowing an easy work on plastics, rubber or wood
• have a surface corrosion-free layer, which allows filing of stainless steel leaving no corrosive residue on the workpiece
They are used for manufacturing of equipment for food, chemical, navy industries and nuclear powerplants.
They are used in jewellery making for filing platinum.
PRODUCT APPLICATIONS: WORKSHOP JEWELLERS AND GOLDSMITHS
-
- CORINOX Rifflers
-
)
They have the same characteristics of their respective needle files, precision files and rifflers but, thanks to CORINOX coating:
• have a surface hardness of 1200 HV (70-72 HRc), therefore a higher wear resistance and longer service life. That allows filing of hardened and tempered steel up to 60 HRc, hard-to-file materials like heat resistant steel, exotic alloys and reinforced plastics
• do not clog, allowing an easy work on plastics, rubber or wood
• have a surface corrosion-free layer, which allows filing of stainless steel leaving no corrosive residue on the workpiece
They are used for manufacturing of equipment for food, chemical, navy industries and nuclear powerplants.
They are used in jewellery making for filing platinum.
PRODUCT APPLICATIONS: WORKSHOP JEWELLERS AND GOLDSMITHS
-
- Diamond Escapement files
-
)
Diamond files are manufactured by electro-plating diamond grains on blanks, which are made under strict dimensional and flatness tolerance, thanks to the most advanced technologies. Used for finishing and/or sharpening of forging, punching and cutting dies on hardened steel with HRc higher than 60 and tungsten carbide. They can also be used on ceramics (natural and sintered), glass, reinforced plastic and marble.
They include:
- DIAMOND NEEDLE FILES
- DIAMOND ESCAPEMENT FILES
- DIAMOND HANDY FILES
- DIAMOND RIFFLERS
and are available in different sizes and grits.
PRODUCT APPLICATIONS: SCULPTURE WORKSHOP
-
- Diamond Handy files
-
)
Diamond files are manufactured by electro-plating diamond grains on blanks, which are made under strict dimensional and flatness tolerance, thanks to the most advanced technologies. Used for finishing and/or sharpening of forging, punching and cutting dies on hardened steel with HRc higher than 60 and tungsten carbide. They can also be used on ceramics (natural and sintered), glass, reinforced plastic and marble.
They include:
- DIAMOND NEEDLE FILES
- DIAMOND ESCAPEMENT FILES
- DIAMOND HANDY FILES
- DIAMOND RIFFLERS
and are available in different sizes and grits.
PRODUCT APPLICATIONS: SCULPTURE WORKSHOP
-
- Diamond Needle files
-
)
Diamond files are manufactured by electro-plating diamond grains on blanks, which are made under strict dimensional and flatness tolerance, thanks to the most advanced technologies. Used for finishing and/or sharpening of forging, punching and cutting dies on hardened steel with HRc higher than 60 and tungsten carbide. They can also be used on ceramics (natural and sintered), glass, reinforced plastic and marble.
They include:
- DIAMOND NEEDLE FILES
- DIAMOND ESCAPEMENT FILES
- DIAMOND HANDY FILES
- DIAMOND RIFFLERS
and are available in different sizes and grits.
PRODUCT APPLICATIONS: SCULPTURE WORKSHOP
-
- Diamond Rifflers
-
)
Diamond files are manufactured by electro-plating diamond grains on blanks, which are made under strict dimensional and flatness tolerance, thanks to the most advanced technologies. Used for finishing and/or sharpening of forging, punching and cutting dies on hardened steel with HRc higher than 60 and tungsten carbide. They can also be used on ceramics (natural and sintered), glass, reinforced plastic and marble.
They include:
- DIAMOND NEEDLE FILES
- DIAMOND ESCAPEMENT FILES
- DIAMOND HANDY FILES
- DIAMOND RIFFLERS
and are available in different sizes and grits.
PRODUCT APPLICATIONS: SCULPTURE WORKSHOP
-
- Die makers' rifflers
-
)
Originally designed for silversmiths, they are also used on hard-to-reach surfaces and for detail finishing on molds, castings and models, where die sinkers’ rifflers are too small.
PRODUCT APPLICATIONS: WORKSHOP JEWELLERS AND GOLDSMITHS
-
- Die sinkers' rifflers
-
)
Originally designed for die sinking, they are also used on hard-to-reach surfaces and for detail finishing on molds, castings and engravings. They can be used for woodworking, too.
PRODUCT APPLICATIONS: WOODWORKING WORKSHOP JEWELLERS AND GOLDSMITHS
-
- Engineers' files
-
)
Manufactured according to ISO 234 norm, but with higher hardness, thanks to CORRADI’s heat treatment.
Used for workshop, hobby and school works on steel, iron and non ferrous metals.
PRODUCT APPLICATIONS: HOBBY AND SCHOOL WORKSHOP
-
- Escapement files
-
)
Designed for manufacturing watch escapements, they can also be used where finer cross section and tips than needle files are requested and for finishing.
PRODUCT APPLICATIONS: WORKSHOP JEWELLERS AND GOLDSMITHS
-
- File brushes
-
)
Two models available:
• type 1: only card brush, for cleaning of coarse cut files and rasps
• type 2: one side file card brush and one side nylon bristles. Bristles allow a gentle cleaning on fine cut files and on model makers’ rasps, without affecting tooth sharpening.
PRODUCT APPLICATIONS: HOBBY AND SCHOOL SCULPTURE SKI MAINTENANCE WOODWORKING MUSICAL INSTRUMENTS WORKSHOP JEWELLERS AND GOLDSMITHS HORSE SHOEING SHARPENING
-
- Files for air powered filing machines
-
)
Used in cast iron casting and light alloy die casting, with robots, too. They can also be used on plastics.
PRODUCT APPLICATIONS: WORKSHOP
-
- Flexible holder
-
)
For milled tooth car body and ski files. Die-cast aluminium body, light but rugged, thanks to its tensioning system allows to achieve exactly the bending radius needed for the surface to be filed.
PRODUCT APPLICATIONS: HOBBY AND SCHOOL SKI MAINTENANCE WOODWORKING WORKSHOP
-
- Formica file
-
)
Special cut with broad longitudinal chipbreaker and spade tooth. Good stock removal with, at the same time, excellent chip unloading when filing plastics.
It can be used for finishing on bronze and brass parts.
PRODUCT APPLICATIONS: HOBBY AND SCHOOL WORKSHOP
-
- Handles for files and rasps
-
)
- For key files: beech wooden handles, tumbler wax finished, with nickel plated iron ferrule.
- For all files and rasps: plastic handles of proven ergonomy and safety.
PRODUCT APPLICATIONS: HOBBY AND SCHOOL SCULPTURE SKI MAINTENANCE WOODWORKING MUSICAL INSTRUMENTS WORKSHOP JEWELLERS AND GOLDSMITHS HORSE SHOEING SHARPENING
-
- Handy files
-
)
Versatile files for working on larger surfaces with higher pressure but the same precision of needle files, either on mold making or precious metals working. The square built-in handle for an improved control, allows to hold the file without any additional handle.
PRODUCT APPLICATIONS: WORKSHOP JEWELLERS AND GOLDSMITHS
-
- Handy rasps
-
)
Versatile rasps for working on larger surfaces with higher pressure but the same precision of needle rasps. The square built-in handle for an improved control, allows to hold the file without any additional handle.
PRODUCT APPLICATIONS: WOODWORKING MUSICAL INSTRUMENTS WORKSHOP
-
- Holesaw drills
-
)
For modeling, shaping and deburring.
PRODUCT APPLICATIONS: HOBBY AND SCHOOL SCULPTURE WOODWORKING WORKSHOP
-
- Key files
-
)
Small and thin files for general use on small parts.
PRODUCT APPLICATIONS: HOBBY AND SCHOOL WORKSHOP
-
- Lathe files
-
)
Single cut files used by lathe operators to deburr and finish while turning.
PRODUCT APPLICATIONS: HOBBY AND SCHOOL WORKSHOP
-
- Micro pocket screwdrivers
-
)
Small multi-purpose screwdriver with chrome plated steel holder. Pen clip easily fits pockets.
It contains 5 interchangeable microblades.
PRODUCT APPLICATIONS: HOBBY AND SCHOOL WOODWORKING WORKSHOP JEWELLERS AND GOLDSMITHS
-
- Milled tooth car body files
-
)
Milled tooth for an easy filing with extreme stock removal on metal sheets, where an excellent surface finishing is needed. Curved tooth allows an easy chip unloading and the file does not clog.
They can also be used on wood.
They can be bent to requested radius using their holder.
PRODUCT APPLICATIONS: HOBBY AND SCHOOL WOODWORKING WORKSHOP
-
- Milled tooth files
-
)
Milled tooth for an easy filing with an extreme stock removal on a wide range of materials, such as copper, lead, zinc, tin and their alloys. Curved tooth allows an easy chip unloading and the file does not clog.
They can be used with excellent results for roughing of iron and cast iron parts, for deburring plastic parts and on wood.
PRODUCT APPLICATIONS: HOBBY AND SCHOOL WOODWORKING WORKSHOP
-
- Needle files extra quality
-
)
Manufactured under the highest quality standards. They have strict size tolerances, uniform cut and hardness on the whole tool. They are used by mold makers, goldsmiths and musical instruments manufacturers for working on small surfaces and finishing.
PRODUCT APPLICATIONS: MUSICAL INSTRUMENTS WORKSHOP JEWELLERS AND GOLDSMITHS
-
- Needle files normal quality
-
)
Manufactured under a high quality standard. Thanks to their round shank, they can be used also without handle.
PRODUCT APPLICATIONS: HOBBY AND SCHOOL WORKSHOP
-
- Needle rasps
-
)
Manufactured under the highest quality standards. They are hardened to HRc higher than 60, for a longer service life and allowing to work on hardwood, too.
They are used by goldsmiths for wax modeling and shaping, musical instruments manufacturers and cabinet makers for working on small surfaces and finishing. Thanks to their round shank, they can be used also without handle.
PRODUCT APPLICATIONS: WOODWORKING MUSICAL INSTRUMENTS WORKSHOP JEWELLERS AND GOLDSMITHS
-
- Packet files
-
)
Special cut files for roughing.
PRODUCT APPLICATIONS: HOBBY AND SCHOOL WORKSHOP
-
- Precision files
-
)
Manufactured according to the highest standards of dimensional accuracy, cutting performance and service life. Compared to Engineers’ files, precision files have marked tapering and smaller tips, sharp edges, strict dimensional and flatness tolerance and a higher and uniform hardness. That is obtained using, in all manufacturing steps, the most advanced CNC systems and the best available robotic technologies.
They are used in tool and machine tool manufacturing, in mold making and gold manufacturing. They are also used by lute makers instead of rasps, where higher surface finishing is requested or for joints and dovetails.
PRODUCT APPLICATIONS: MUSICAL INSTRUMENTS WORKSHOP JEWELLERS AND GOLDSMITHS
-
- Riffler rasps
-
)
Specifically designed by CORRADI for wood-working, they are used for finishing models and for sculpture.
PRODUCT APPLICATIONS: WOODWORKING MUSICAL INSTRUMENTS WORKSHOP
-
- Rotary countersinks
-
)
For hole countersinking on various materials.
PRODUCT APPLICATIONS: HOBBY AND SCHOOL WORKSHOP
-
- Special die makers' rifflers
-
)
Designed by CORRADI, they are similar to die makers’ rifflers, but have smaller cross section and finer tips, allowing an easier work on hard-to-reach surfaces and for detail finishing on molds, castings and models where die sinkers’ rifflers are too small.
300 mm long version is used by mold makers for working on larger surfaces with higher pressure but the same precision of small rifflers.
PRODUCT APPLICATIONS: WORKSHOP
-
